duplex roller chain

Solution Description

Simplex stainless 304 Roller Chain (08B-1, 24B-1)
 

The most frequently used chain is roller chain or as it is also recognized transmission chain. These are the most basic chain drives, Utilized primarily for transmitting electrical power. Can be provided from 3mm pitch up to 4″ pitch in either gentle steel or stainless metal.

We very own the innovative products and the superior technologies, this kind of as: 
one. CAD Designer
2. Wire Reducing Device
three. Chain Running In Device
4. Conveyor Furance
5. Ball Drift
six. Shot Peened Elements
7. Layout Of Website link Plate Waistline

Pack Depth:

Company Detail:

TAI is 1 of a professional exporter with exporting Electricity TRANSMISSION Elements: Roller chains,conveyor chain,stainless metal chains, agricultural chains, metal removable chains, unique chains, sprockets, s. S. Sprockets, HRC couplings, pulleys, bushes and many others. All these items have been supplied often to Entire world Wide for above 15 a long time. 

 

Welcome get in touch with for more detail.

Ava Gao(Revenue)
Tran-Car Industries Co.,Constrained
716 Gold River Heart,NO.88 Shishan Rd.,
New District,HangZhou,P.R.China.P.C.:215011
Tel:-512-6583
tran-automobile
 

 

DIN/ISO
Chain No.
Pitch Roller
Diameter
 
Width Between
Inner Plates
 
Pin Diameter
 
Pin Length
 
Inner Plate depth
 
Plate thick
ness
 
Final
Tensile
Power
 
Typical
Tensile
Power
Weight Per Meter
 
Mm mm mm mm mm mm mm mm kN/LB kN Kg/m
04B-1 six.000 four.00 two.80 1.eighty five six.eighty seven.80 5.00 .60 3./682 three.2 .11
05B-one 8.000 5.00 three.00 2.31 8.20 8.ninety seven.ten .eighty 5./1136 5.9 .20
*06B-one 9.525 six.35 five.seventy two 3.28 13.fifteen 14.ten eight.20 1.30 nine./2045 ten.4 .41
08B-1 twelve.seven-hundred 8.fifty one seven.75 4.forty five 16.70 eighteen.twenty eleven.eighty one.sixty eighteen./4091 19.forty .sixty nine
10B-one fifteen.875 ten.sixteen 9.65 five.09 19.50 20.ninety fourteen.70 1.70 22.4/5091 27.50 .93
12B-1 19.050 12.07 eleven.68 5.72 22.fifty 24.two 16.00 one.eighty five 29./6591 32.twenty 1.fifteen
16B-1 25.four hundred fifteen.88 seventeen.02 8.28 36.ten 37.4 21.00 4.fifteen/3.one 60./13636 72.eighty 2.seventy one
20B-1 31.750 19.05 19.fifty six 10.19 forty one.30 forty five. 26.40 4.5/3.five ninety five./21591 106.7 3.70
24B-1 38.a hundred 25.forty 25.forty 14.63 fifty three.40 57.eighty 33.twenty 6./4.8 a hundred and sixty./36364 178. 7.10
28B-1 44.450 27.94 thirty.ninety nine 15.ninety sixty five.10 sixty nine.fifty 36.70 7.5/6. 200./45455 222. 8.50
32B-one 50.800 29.21 30.99 17.81 66.00 71. forty two.00 seven./6. 250./56818 277.5 ten.twenty five
40B-1 63.50 39.37 38.10 22.89 82.twenty 89.2 52.96 eight.5/8. 355./80682 394. 16.35
48B-one 76.20 forty eight.26 45.seventy two 29.24 ninety nine.ten 107. sixty three.eighty 12./ten. 560./127272 621.six twenty five.00
56B-1 88.ninety 53.98 fifty three.34 34.32 114.sixty 123. 77.80 thirteen.5/12. 850./193180 940. 35.seventy eight
*Bushing chain: d1 in the table indicate the external diameter of bushing
 


/ Meter
|
50 Meters

(Min. Order)

###

Usage: Transmission Chain
Material: Stainless steel
Surface Treatment: Polishing
Feature: Heat Resistant
Chain Size: 1/2"*3/32"
Structure: Roller Chain

###

Customization:
Available

|


###

DIN/ISO
Chain No.
Pitch Roller
Diameter
 
Width Between
Inner Plates
 
Pin Diameter
 
Pin Length
 
Inner Plate depth
 
Plate thick
ness
 
Ultimate
Tensile
Strength
 
Average
Tensile
Strength
Weight Per Meter
 
Mm mm mm mm mm mm mm mm kN/LB kN Kg/m
04B-1 6.000 4.00 2.80 1.85 6.80 7.80 5.00 0.60 3.0/682 3.2 0.11
05B-1 8.000 5.00 3.00 2.31 8.20 8.90 7.10 0.80 5.0/1136 5.9 0.20
*06B-1 9.525 6.35 5.72 3.28 13.15 14.10 8.20 1.30 9.0/2045 10.4 0.41
08B-1 12.700 8.51 7.75 4.45 16.70 18.20 11.80 1.60 18.0/4091 19.40 0.69
10B-1 15.875 10.16 9.65 5.09 19.50 20.90 14.70 1.70 22.4/5091 27.50 0.93
12B-1 19.050 12.07 11.68 5.72 22.50 24.2 16.00 1.85 29.0/6591 32.20 1.15
16B-1 25.400 15.88 17.02 8.28 36.10 37.4 21.00 4.15/3.1 60.0/13636 72.80 2.71
20B-1 31.750 19.05 19.56 10.19 41.30 45.0 26.40 4.5/3.5 95.0/21591 106.7 3.70
24B-1 38.100 25.40 25.40 14.63 53.40 57.80 33.20 6.0/4.8 160.0/36364 178.0 7.10
28B-1 44.450 27.94 30.99 15.90 65.10 69.50 36.70 7.5/6.0 200.0/45455 222.0 8.50
32B-1 50.800 29.21 30.99 17.81 66.00 71.0 42.00 7.0/6.0 250.0/56818 277.5 10.25
40B-1 63.50 39.37 38.10 22.89 82.20 89.2 52.96 8.5/8.0 355.0/80682 394.0 16.35
48B-1 76.20 48.26 45.72 29.24 99.10 107.0 63.80 12.0/10.0 560.0/127272 621.6 25.00
56B-1 88.90 53.98 53.34 34.32 114.60 123.0 77.80 13.5/12.0 850.0/193180 940.0 35.78
*Bushing chain: d1 in the table indicate the external diameter of bushing
 

/ Meter
|
50 Meters

(Min. Order)

###

Usage: Transmission Chain
Material: Stainless steel
Surface Treatment: Polishing
Feature: Heat Resistant
Chain Size: 1/2"*3/32"
Structure: Roller Chain

###

Customization:
Available

|


###

DIN/ISO
Chain No.
Pitch Roller
Diameter
 
Width Between
Inner Plates
 
Pin Diameter
 
Pin Length
 
Inner Plate depth
 
Plate thick
ness
 
Ultimate
Tensile
Strength
 
Average
Tensile
Strength
Weight Per Meter
 
Mm mm mm mm mm mm mm mm kN/LB kN Kg/m
04B-1 6.000 4.00 2.80 1.85 6.80 7.80 5.00 0.60 3.0/682 3.2 0.11
05B-1 8.000 5.00 3.00 2.31 8.20 8.90 7.10 0.80 5.0/1136 5.9 0.20
*06B-1 9.525 6.35 5.72 3.28 13.15 14.10 8.20 1.30 9.0/2045 10.4 0.41
08B-1 12.700 8.51 7.75 4.45 16.70 18.20 11.80 1.60 18.0/4091 19.40 0.69
10B-1 15.875 10.16 9.65 5.09 19.50 20.90 14.70 1.70 22.4/5091 27.50 0.93
12B-1 19.050 12.07 11.68 5.72 22.50 24.2 16.00 1.85 29.0/6591 32.20 1.15
16B-1 25.400 15.88 17.02 8.28 36.10 37.4 21.00 4.15/3.1 60.0/13636 72.80 2.71
20B-1 31.750 19.05 19.56 10.19 41.30 45.0 26.40 4.5/3.5 95.0/21591 106.7 3.70
24B-1 38.100 25.40 25.40 14.63 53.40 57.80 33.20 6.0/4.8 160.0/36364 178.0 7.10
28B-1 44.450 27.94 30.99 15.90 65.10 69.50 36.70 7.5/6.0 200.0/45455 222.0 8.50
32B-1 50.800 29.21 30.99 17.81 66.00 71.0 42.00 7.0/6.0 250.0/56818 277.5 10.25
40B-1 63.50 39.37 38.10 22.89 82.20 89.2 52.96 8.5/8.0 355.0/80682 394.0 16.35
48B-1 76.20 48.26 45.72 29.24 99.10 107.0 63.80 12.0/10.0 560.0/127272 621.6 25.00
56B-1 88.90 53.98 53.34 34.32 114.60 123.0 77.80 13.5/12.0 850.0/193180 940.0 35.78
*Bushing chain: d1 in the table indicate the external diameter of bushing
 

buy drive chain

Buying a drive chain requires a certain understading of its characteristics. This article discusses the different types of chains available, including Silent, Flat-top, and Duplex. By the end of this article, you should have a basic understanding of what each type of chain is for. First, here are some basic rules to keep in mind when shopping for a chain. To find the drive chain that best suits your needs, read on.

roller chain

Choosing the right roller chain for your drive chain depends on several factors. First, you have to determine the motor horsepower and rpm for the small drive sprocket. These values ​​determine the size of the chain and the number of teeth on the drive sprocket. Next, you need to determine the size of the conveyor chain, it can be the horizontal, vertical, or curved radius. Depending on your specific needs, you can also choose between two-strand or three-strand chains.
The roller chain of the drive chain must be properly tensioned. It should also have a proper lubrication system. Chain sag should not exceed two to four percent of the center distance (the distance between the two axles). Also, it shouldn’t make any unusual noises or obvious problems. One of the main reasons for excessive wear is the size of the load. Each chain has a specified maximum working load.
The maximum roller chain load must be less than 1/9 or 6 times the tensile strength of the drive chain. This amount should not exceed this threshold, as exceeding this level will result in chain plate fatigue. To avoid this, you should use a roller chain with a higher number of strands. Also, for high power requirements, a roller chain with a higher number of strands is recommended. One final tip for choosing a drive chain: it should not be used when there is a high risk of corrosion or rusting.
The materials used to manufacture roller chains vary according to the specific application. Common materials include steel and stainless steel. However, stainless steel is used in food processing machinery and other environments that require lubrication. Brass and nylon are also sometimes used. These factors determine the selection of suitable materials for the drive chain. If you are not sure which material to use, you can consult an industry professional. These professionals will help you choose the right chain for the job at hand.
chain

mute chain

The design of the silent transmission chain is as follows: the large chain plates 2 are stacked one on top of the other in the direction of the chain length. The connecting rods are connected by connecting pins 3. The outermost and central guide plates 4 are fastened to the connecting pins 3 by means of rivets. This construction helps minimize friction on the sliding surfaces of the chain. Chainplate 2 of the silent transmission chain is usually made of stainless steel.
The link plates are made of steel and have a rectangular shape with pinholes 41. These guide plates have no teeth but have curved surfaces that guide the silent drive chain on the sprockets. In addition, the rear portion of the guide plate is higher than the portion of the chainplate. This feature improves pitch balance. The present invention is also applicable to silent transmission chains using rockers.
When it comes to chain design, it’s important to remember that silent drive chains are often used in automotive engines, especially timing and cam drives. This type of drive reduces noise and vibration due to its low engagement angle and links engagement with the sprocket. However, these applications are not limited to timing and cam drives; they can also be used for front-wheel power transmission. For example, silent drive chains are designed to resemble those used in NASCAR racing engines.
The design of the silent drive chain is based on the structure of the roller chain. Its components are standardized and manufactured according to pitch. There are single-row and multi-row versions. Quiet chains, also known as inverted tooth chains, are shaped to reduce noise from stretching. It’s also designed to minimize the amount of friction caused by small changes in pitch. Its teeth don’t slide against each other, so the chain is smoother and more durable.

flat top chain

One of the important parts of the flat top chainplate system is the hinge pin, which is used to fix the chainplate and is responsible for the smooth and efficient conveying of the chainplate. There are several types of hinge pins, including single hinge pins and double hinge pins. The single hinge pin is suitable for the chainplate with a small span and small bearing capacity, and the double hinge pin is suitable for the chainplate with a large span and high bearing capacity.
The side bending flat top chain is suitable for conveying large and medium workpiece pallets. They can be made of steel or plastic, each with its own advantages. Both chainplates are designed to convey material smoothly. Side curved flat-top chains can be used on straight conveyors. They have a low coefficient of friction and can transport weights up to 1.2 kg/cm. They can also be combined with HD profiles.
Flat top drive chains are usually made of plastic material and come in two types: tabletop chains and buffer chains. They come in a variety of widths, but the most popular are standard widths, ranging from 3.25 inches to 12 inches. MatTop chains are usually shipped in 10-foot lengths. They come in different styles, but they all have the same basic specs. Tabletop chains are designed for general conveying, while pad chains are used for specific applications. Solid top chains are suitable for conveying bulk materials, while wide pad chains can handle large volumes of fluids and/or solid-solid mixtures.
These chain conveyors can be used to convey, connect or lift small items. This type of chain is especially useful in industries where the product is hot or greasy. The modular design of these chains allows them to be configured in three dimensions, making them suitable for production changes and transitions. They also help reduce slack in the chain. Flat top chains are commonly used in final assembly and mechanical or paint restoration in the automotive industry.

double chain

Besides the roller chain, another type of chain drive is the double drive chain. This type of chain consists of a series of short cylindrical rollers connected together by side links and driven by gears called sprockets. This type of chain is very reliable and only requires a tractor with a high rpm PTO. It is manufactured by CZPT and is available in many different sizes and finishes.
chain

Self-lubricating chain

Self-lubricating drive chains are the ideal solution for applications that do not require the relubrication of conventional chains. This maintenance-free roller chain features fully heat-treated components that increase the chain’s fatigue resistance and strength. It’s sintered alloy bushings are oil-impregnated, reducing the chance of premature wear and elongation. Its self-lubricating properties enhance its durability and work well even in hard-to-reach places.
CZPT self-lubricating roller chains feature preloaded sintered steel bearing pins and oil-impregnated sintered bushings. These chains are drop-in replacements for standard roller chains and run on the same sprockets as standard chains. In addition to being maintenance-free, self-lubricating roller chains are compatible with most existing sprockets and are ideal for demanding applications.
The O-ring chain concept was used to develop self-lubricating systems. It has two or more annular grease storage chambers. A self-lubricating bushing roller chain has an oil reservoir between its pin chain and the roller chainplate. A grease seal between these two plates isolates the moving parts and keeps the joints well lubricated. O-rings are made of special nitrile rubber, whose properties vary by application.
CZPT SLR conveyor chains and CZPT SLR drive chains have rollers on sintered bushings. CZPT SLR chains and SLR conveyor chains are self-lubricating and have a higher working load than standard ANSI chains. They may not be interchangeable with other self-lubricating chains from other manufacturers. Self-lubricating drive chains are the best solution for demanding industrial applications requiring heavy-duty, reliable conveying.

 duplex roller chain duplex roller chain
editor by CX 2023-03-27